DIY hanging picture frames

This might be one of the easiest projects I have ever done, and maybe one of my favorites. I've made these frames several times, each time evolving it a little more and I think it is now perfected.
I used
6 unfinished frames (4x6)
1 spool Satin ribbon
1/2 yard fabric
Tacky glue
Sissors
Staple gun
Picture hangers of your choice
Foam brush


I started out by painting the entire front, sides and inside of the frame with tacky glue and then cut off the extra. I pulled the fabric over the frame tight, the glue drys fast on a unfinished frame because it soaks into the wood fast. Once you have the fabric in the right place, poke a hole in the center of the picture frame cut a 'X' to the inside edges --just where the picture would be. Add more glue if needed, and push the fabric flaps into the frame and cut off the access. Repeat for the rest of the frames.

Follow the purple lines to cut fabric to inside of the frame

I spaced my frames out, about 6" inches apart from each other on my ribbon and marked on the back with pencil where I wanted them. I used a staple gun, however I think hot glue would work just fine, to secure my frames. At the top I used a half-circle fastener as my hanger, but there are a tons of decorative options available of you would like something a little more fancy.

As you can see from the picture of the back, I did not use fancy or nice picture frames. I got mine from Ikea, 3 for $2. If you want to use finished wooden frames make sure to sand them first!
I'd love to see pictures of you try these!

Happy crafting!

DIY Valentine's day wreath

My free time has been a little lacking lately, so when I had a free day I went to the fabric store and picked up some supplies to make a valentines day wreath.

My supplies I used were:

1/4 yard red felt
1/4 yard light pink felt
White patterned quilt square
Pink patterned quilt square
Fabric stiffener
Pearl embellishments
Hot glue gun
Scissors
Wreath

I started by cutting my felt length wise in about a 2.5" strip. This did not cover my wreath completely, so I aded a red strip at the top to cover it and I liked the look. Depending on the size wreath you want you may need to cut more than one strip of each. I started wrapping my strips together and adding hot glue after every 2-3 times around--always at the back. Once I had my wreath covered cut a small skinny strip of each color, twisted, then hot glued to the back. If I had a third color, I think it would have looked cute braided.
The flowers were the most difficult and time consuming part of this project. I used my Cricut and the Flower Shoppe cartridge to cut them out. If you do not have a Cricut, there are tons of cute flowers available at craft stores, and you would not need the quilt squares or the Pearl embellishments.

I started out by applying  fabric stiffener to my fabric. I like to apply it then microwave it for 30-60 seconds to help it dry, I have also heard of people using a blow dryer to speed up the process. Once it is completely dry, I put it on my mat. Now if you are having problems making your fabric stick you can use masking tape or painters tape on the entire surface or the edges  to help it stay in place. Set your depth to 6, your speed to 1 and your pressure to 6. Cut away! You may need to cut parts that did not cut completely from the Cricut.  I alternated colors but my biggest flower is 3" and they decrease in size by .5" and stop at 1.5" at the center. I assembled my flowers with hot glue and added a pearl embellishment in the center.
I positioned my flowers where I wanted and hot glued them on and my wreath was finished!

DIY dog treats!

For those of you who know me know, I love my dog! You may also know that he has been sick for most of the last year and it has been hard on all of us. So any way I can give my pup a little extra love, I'm all for it. I found a dog treat recipe that was pretty basic, but also pretty vague. So I tried it and figured out some details that were left out and thought I would share it with my wonderful readers! 

My handsome little man, Conan

You will need:

1 cup flour
1/2 cup milk
1 1/2 tablespoon butter
1/2 cup shredded cheese

Preheat oven to 350. Mix all ingredients until soft dough forms, if needed add more flour or milk little at a time.  Roll dough out and cut shapes out with a cookie cutter or roll into 1 inch balls and flatten. Place onto a cookie sheet and bake at 350 for 15-17 minutes.
My dough was a bit sticky so I used cooking spray and they came up just fine.

Finished treats!

 

Conan waiting for his treats to cool

These were so simple to make, and with kitchen staples. Conan sat by the stove waiting for them to come out of the oven, he loves them! I know this isn't 'crafts' but it is a super easy and who doesn't love making something for their pup?

Happy baking!

Here is another simple treat recipe

 Peanut butter and oats dog treats

1/3 cup peanut butter, chunky or smooth 

1 cup rolled oats

2 cups flour

1 1/4 cups hot water

 Preheat oven to 350. Mix rolled oats and flout together in a large mixing bowl. Add peanut butter then water to the dry mix. If your dough is too sticky you can add flour a little at a time. Mix until a soft dough forms. Roll dough and cut with cookie cutters or into 1 inch balls and flatten. Bake for 40 minutes and let cool until hard. 

 

DIY baby onesie vest

I recently had oral surgery, so on my down time I've been practicing my sewing. My first project I did was a onesie vest and tie combo for a friends baby. As I've said before--I'm new to sewing so if I can do this, so can you! Although I will tell you, this was my most challenging project to date.
I found the tutorial from this website (Onsie vest tutorial.)

Mine is a little different, I wanted my vest to go all the way to the top of the onesie and I added a tie from ribbon.

I made the inside and outside of my vest from old men's shirts I found at a local Good Will (each $2.99)
The tie I folded into a point at the bottom and ran a stitch, and pinched at the top to create a ''tie" look. I then put a stitch in to hold the tie part and ran a stitch across the top.

As a beginner sewer, I will say that I had the hardest part with all the corners in the vest, if you are a regular sewer than this will be a breeze for you!

Happy sewing!

DIY: Make your own buttons!

I found this idea, and let me tell you; it blew my mind! I love buttons, and the idea of making my own, as I wanted them...perfect! Instead of posting how I make them or giving my own instructions I'm posting a link to where I found it. This woman does a fantastic job of explaining how she does it and has pictures of her steps. I'd love to see pictures of your buttons if you try this!
Happy crafting!!


http://scissorspaperwok.com/2011/07/18/how-to-make-clothing-buttons-from-shrink-plastic/

DIY purse notebook

I always like to have something in my purse to write notes or to keep track of things when I'm out. I think post-it's are great, but they get messy in a purse or bag getting bounced around so I covered some up with some card stock, added a monogram, and decoupaged a pen to match. Now I have a personalized notepad exactly the way I want it!

For this project I used:
Patterned cardstock
Pattern sissors
"W" cutout
Circle cutout
Pen
Post it's
Hot glue
Mod podge
Velcro dots

The first thing I did was cut my  cardstock down to size, this will be different depending on what paper you buy. For my post it's, I needed to cut mine to be 3.5" X 8. Place the post it with about 3.5" from the bottom and fold up and over from both ends. Make sure to make a crisp fold at each corner of your notepad.

 

Add a Velcro dot to the center and seal to adhere. As shown, I have a picture of a pen to match. I cut cardstock to match and covered the paper and pen with a thin layer of mod podge. This took some time to adhere. I rolled the pen to make the ends lay flat and applied a coat of mod podge to protect the paper. You may need to make your pen cap bigger to accommodate the paper, I did so using pliers. Below is a picture with no monogram, just to show that it looks nice without embellishment.

 

 

 I have seen something like this given out as a favor for a baby shower or a wedding shower with a rubber duck, rattles, or campaign glasses on the front. These are super easy and quick to make. A great idea for last minute Christmas gifts!

Happy crafting!!

DIY Small gift box

This weekend we wrapped all of our presents at our house, and late Sunday night I realized I forgot to wrap my work secret Santa gift. I looked through all our leftover bags, and found nothing useful, aand my gift was too small to wrap. So I decided to make my own gift box!

I used an almost empty cold pill box, covered it with a thin layer of decoupage glue, and cut scrap wrapping paper to fit!

This ended up being the perfect size for what I needed. I work with kids and am perpetually fighting off a cold, so I have an infinite supply of boxes! These would be perfect for gift cards, jewellery, or other small gifts!

Happy crafting!

DIY Thrift Store Chalk Board

At my last thrift store run I got a coat rack (Link to coat rack tutorial ), a mirror, and a few other things. I have wanted to make a chalk board for our kitchen for a while, but I couldn't find the right frame to make it in. The mirror I got was $10 and I got 2 cans of spray paint for about $6 each. The mirror started out looking like this:

I started out bu sanding the entire frame and mirror surface.Next, I painted the entire surface a high-gloss white, I needed about 3 coats. I waited a few days, then taped and used plastic to cover the white frame. I covered the mirror only part with the chalkboard paint and finished!
We use ours for grocery lists, notes, and reminders, not to mention it covers the fuse box!

For this project I used:
1 Large frame glass/mirror in
1 can of chalkboard spray paint (they also have available in brush on and is less expensive)
1 can of high-gloss white
Sand paper
Masking tape
Plastic grocery bags


Happy Crafting!

Christmas stocking hangers DIY

I have been looking for ways to hang my Christmas stocking without damaging my walls, and I didn't want to use the command hooks. I came up with the idea of using door knobs! I went to Home Depot to look at knobs and not knowing if I want to keep the knobs up as picture hangers later, I was not looking to spend a fortune. I ended up with plain wooden door knobs that look like this:

I painted them black then applied a opalescent coat over the top and applied a small gem in the center. This is the finished product!

I fastened them to the wall with the smallest command strips! To make your own stocking hanger you need:
Wooden door knobs
Craft paint
Small gem or embelishment
Paintbrush

This project took minutes to complete, but I think looks so nice with our color scheme. Best of all, it cost under $4!

Happy crafting!

Holiday Gift Ideas for at Home Crafters

Do you like to make crafts at home? Are you searching for the perfect gift for your crafter? Here are a few gift ideas which will help you or your loved one decorate your home.

Thanks to electronic precision and easy-to-use design, the Cricut Expression personal cutting machine makes it a snap to create beautiful cards, displays, scrapbooks, signs, and labels. Great for home, office, or classroom use, the machine features a generous range for small or large shapes and can accommodate materials from vellum to cardstock to vinyl. Creating a cut requires simply inserting a cartridge, loading the machine, making a selection, and pressing “cut.”

This Cricut Essentials Kit lives up to its name, as it provides all the essential tools and accessories needed for creating successful paper crafts with one of Provo Craft's Cricut personal electronic cutting machines. The perfect companion to a brand new Cricut, the kit enables greater flexibility and dexterity for making unique paper scrapbook embellishments, fun bulletin board letters, and custom stationery.
 

Christmas Card Maker. From your heart to theirs — keepsake cards you create using your home computer and printer! This all-in-one set includes our exclusive Dover Design Studio software with over 250 images, patterns, fonts, and artful greetings; video lessons; and templates for bi-fold cards, a postcard, and envelopes. A gallery of finished cards provides inspiration. Cards and envelopes not included. Mac and PC compatible.

Card Making with Cricut. Demonstrating the endless assortment of shapes and styles that can be made using the Cricut from Provo Craft, this guide helps crafters create unique and sensational greeting cards with ease. With simple instructions, imaginative sample projects for occasions such as baby showers and birthdays, and unlimited design options, this helpful reference explains how to impress friends, coworkers, and family with personalized homemade cards.

Mod Podge is 40 years old, but this classic decoupage glue still has its cool. Crafters of any skill level can create anything from paper keepsakes to jewelry to home decor items. The original formula, all-in-one glue sealer and finish, can be used to decoupage on nearly any surface. Quick-drying formula allows for multiple coat build up and projects dry to a matte finish. Cleans up easily with soap and water. Certified AP non-toxic and water based. 

What are your craft holiday gift ideas?

Follow me on Pinterest!

DIY Cricut and thrift store coat rack!

My husband recently sent me in search of a coat rack. My first thought was that Target or Bed, Bath, and Beyond would have one; but I pass a "new uses" store on my way to work and I figured before spending $40 on one I'd hit the thrift store.
I walked around for a while letting all the possibilities set in. I picked up a few items including a mirror for $7 (blog to come) and a lamp base which I havent decided if I want to leave alone or decorate a lamp shade. The best find might be the coat rack for $3-all of the needed hardware included.

Before! I got a little excited and started to paint before taking a full picture, this is still a good idea of what the entire rack looked like.

Now by looking at the picture you can see why this was only $3, but like me you can probably see potential! I know my husband thought I was crazy when I pulled this out of the bag, but with some paint, a few letter, and some decoupage; my thrift store coat rack turned into one of the favorite parts of my entryways!

 For this project I used:
Sand paper
Letters
Black paint
paint brush (2)
Decoupage

I first sanded the entire piece, I found that on the areas I didn't sand well the paint didn't stick. I applied several coats of black paint. I used black craft paint, the kind they always have on sale at Michael's for around $0.50. I let this dry for about 30-45 minutes, this paint does dry fast. Using spray paint could work nicely too.
I used my Cricut to cut out the letters and phrases, however finding letters and/or phrases at craft stores is a good option. Because I used my Cricut to cut my letters/phrases out I could play with what size worked and the layout.
After I had all my letters cut out and the paint was dry I used my homemade decoupage to add my letters. I also gave the entire coat rack 2 coats to keep the letters secure and from scratches.

In total this project cost around $6! I think that is so awesome with Christmas right around the corner and Holiday travels too!
$3 coat rack
$0.20 decoupage
$0.50 Paint
$1 2 foam brishes
$1 2 sheets scrapbook paper (8"X11")

I also plan on making something like this for my wall as just a plaque, no knobs. You can purchase wood at a Home Depot or most craft stores. The possibilities for modifying this craft are endless!
Have fun and happy crafting!

How to: Fun and cute 'Let it snow' wall hanging.

I'm in no way ready for snow, but I'm slowly getting ready for the holiday season. It seems like every store you go into there is Christmas music playing and holiday decorations everywhere! I've decided since I can't escape it, I may as well embrace it and what better way than crafting!

Perfect wall hanging to keep or give as a gift!

For this project you will need:
1 Wooden wall plaque  16"X4"
Brown craft paint
Medium blue craft paint
Translucent opalescent white paint (optional)
Mod Podge (Matte) 
Sand paper
1-3 foam brushes
"Let it snow" phrase cutout
Snowflake cutouts (several)
Snowman cutout

First sand down any rough edges on your wall hanging, then mix the blue and opalescent paint. I mixed just enough to give the blue paint a shimmer, this is optional I liked the shimmer for a little depth. Cover the entire wall hanging (edges included) with the blue paint and wait for it to dry. Depending on the paint and wood you may need a few coats to cover completely. Once dry, paint the edges with the brown paint and let dry. Once dry, give the brown edges a light sanding to give a "worn" look".
With the frame long ways, apply the "Let it snow" phrase at the top of the frame. Be careful to wipe all access glue away, it will dry glossy. Place snowman at the bottom of the frame and glue on. Between the phrase and snowman place snowflakes to look like they are falling. Once you have everything glued on, apply 1-2 coats of Mod Podge to seal everything down and protect from scratches.

You can also use white (opalescent) puff paint for snow. Either add small to medium dots or make snowflake shapes!
I hope you have as much getting into the holiday spirit as I did! 

How To: Easy to make Holiday luminaries

Today my sister-in-law and I went to a craft show and I was inspired. There were so many incredible things that I do not think I have time to make, but after a quick trip to Michaels and a lot of contemplation we decided to make luminaries.

I plan to make more in different sizes, and also square instead of a circle. I will post more as I make them!

 

 

Blurry, but a good idea of what it will look like light up.

Covered seam

What you will need:

1. Flameless LED Tealights (1)
2. Cardstock/scrapbook paper
3. Vellum
4. Christmas, winter, or holiday punch.
5. Glue
6. Scissors or paper cutter

You first need to cut your paper down to the size you want. I used 11X8.5 paper and cut it in half long ways (4.25") and then cut about 1" to make the final deminsions 4.25"X10".  As I have mentioned before, I have a Cricut and use it for most of my crafting, this project included. If you are using a Cricut make sure to move your blade down about 1.5" and over about 1" to center and allow room for overlapping. If you are using a paper punch, punch around paper, allowing room on both ends for overlapping to glue.

Flip your paper over after all designs are cut out and glue vellium to the back side of the paper. I found that my vellium wanted to curl up at the edges so I placed it under a book to dry for about 10 minutes, and it seemed about perfect. Be sure to get around the edges of your cutouts, or when you roll your paper the vellium will pull away.

 Once you have your design cut out and the vellium glued to the inside, bring the edges together and glue, making sure to wipe all access glue away. I used a hot glue gun to make sure I had a stron hold. If you do not have a hot glue gun, masking tape on the inside and outside to hgold the sides together while they dry may be a good idea. Another tip is to wrap it around something like a can or a peanut butter jar to dry. This way you can make sure you have a perfect circle!

I cut out trees, and glued red stars in the spaces between the trees. and a larger star to cover the seam where the sides are glued together. Other ideas are; gems, sequins, different punches, or bows.

How to make an easy and cute fall wall hanging

As fall is mid-way through, I thought my first craft I would bring you is a fall wall hanging. It’s pretty simple and easy to modify if you choose to have a different saying or picture.  

The supplies needed are:

1 pumpkin cutout

1 “Autumn Blessings” cutout

Various leaf cutouts, amount depending on the size of your plaque

1 wooden wall plaque (I used 9”x13”)

1 bottle of dark brown crafting paint

1 bottle of cream crafting paint

Foam or regular paintbrush

Glue/ Mod Podge

Ribbon (optional)

Sand paper

The first thing I do to all of my wooden wall hangings is sand them down. I think that the paint looks better on a smooth surface. Once your wooden plaque is sanded down, apply 1-2 coats of the dark brown paint and let dry. Once dry, apply 1-2 coats of the cream paint, once dry give a light sanding to the outside edges to give a warn look.

Apply your pumpkin and “Autumn Blessings” with a thin coat of glue, making sure to coat the entire surface of the cutout completely. Using too much glue will cause your paper to buckle and give your hanging an uneven look. Once all the cutouts have dried I applied 1-2 coats of (matte) Mod Podge to seal all of the cutouts onto my wall hanging. This will also help seal any edges down that may have pealed up while drying.

Some wall hangings you purchase at craft stores come with nail brackets on the back, others come bare. I like to add ribbon with hot glue to smaller wall hangings. It gives them a more decorative look and is a simple solution for hardware free wall hangings!