DIY: Make your own buttons!

I found this idea, and let me tell you; it blew my mind! I love buttons, and the idea of making my own, as I wanted them...perfect! Instead of posting how I make them or giving my own instructions I'm posting a link to where I found it. This woman does a fantastic job of explaining how she does it and has pictures of her steps. I'd love to see pictures of your buttons if you try this!
Happy crafting!!


http://scissorspaperwok.com/2011/07/18/how-to-make-clothing-buttons-from-shrink-plastic/

DIY purse notebook

I always like to have something in my purse to write notes or to keep track of things when I'm out. I think post-it's are great, but they get messy in a purse or bag getting bounced around so I covered some up with some card stock, added a monogram, and decoupaged a pen to match. Now I have a personalized notepad exactly the way I want it!

For this project I used:
Patterned cardstock
Pattern sissors
"W" cutout
Circle cutout
Pen
Post it's
Hot glue
Mod podge
Velcro dots

The first thing I did was cut my  cardstock down to size, this will be different depending on what paper you buy. For my post it's, I needed to cut mine to be 3.5" X 8. Place the post it with about 3.5" from the bottom and fold up and over from both ends. Make sure to make a crisp fold at each corner of your notepad.

 

Add a Velcro dot to the center and seal to adhere. As shown, I have a picture of a pen to match. I cut cardstock to match and covered the paper and pen with a thin layer of mod podge. This took some time to adhere. I rolled the pen to make the ends lay flat and applied a coat of mod podge to protect the paper. You may need to make your pen cap bigger to accommodate the paper, I did so using pliers. Below is a picture with no monogram, just to show that it looks nice without embellishment.

 

 

 I have seen something like this given out as a favor for a baby shower or a wedding shower with a rubber duck, rattles, or campaign glasses on the front. These are super easy and quick to make. A great idea for last minute Christmas gifts!

Happy crafting!!

DIY Small gift box

This weekend we wrapped all of our presents at our house, and late Sunday night I realized I forgot to wrap my work secret Santa gift. I looked through all our leftover bags, and found nothing useful, aand my gift was too small to wrap. So I decided to make my own gift box!

I used an almost empty cold pill box, covered it with a thin layer of decoupage glue, and cut scrap wrapping paper to fit!

This ended up being the perfect size for what I needed. I work with kids and am perpetually fighting off a cold, so I have an infinite supply of boxes! These would be perfect for gift cards, jewellery, or other small gifts!

Happy crafting!

Simple Christmas card ideas

My goal this year was to make all of my Christmas cards, however, I did not realize how lofty of a goal this was until I started! I had a hard time finding inspiration so I thought I'd upload some examples for those of you looking!
Happy crafting!

DIY Cricut and thrift store coat rack!

My husband recently sent me in search of a coat rack. My first thought was that Target or Bed, Bath, and Beyond would have one; but I pass a "new uses" store on my way to work and I figured before spending $40 on one I'd hit the thrift store.
I walked around for a while letting all the possibilities set in. I picked up a few items including a mirror for $7 (blog to come) and a lamp base which I havent decided if I want to leave alone or decorate a lamp shade. The best find might be the coat rack for $3-all of the needed hardware included.

Before! I got a little excited and started to paint before taking a full picture, this is still a good idea of what the entire rack looked like.

Now by looking at the picture you can see why this was only $3, but like me you can probably see potential! I know my husband thought I was crazy when I pulled this out of the bag, but with some paint, a few letter, and some decoupage; my thrift store coat rack turned into one of the favorite parts of my entryways!

 For this project I used:
Sand paper
Letters
Black paint
paint brush (2)
Decoupage

I first sanded the entire piece, I found that on the areas I didn't sand well the paint didn't stick. I applied several coats of black paint. I used black craft paint, the kind they always have on sale at Michael's for around $0.50. I let this dry for about 30-45 minutes, this paint does dry fast. Using spray paint could work nicely too.
I used my Cricut to cut out the letters and phrases, however finding letters and/or phrases at craft stores is a good option. Because I used my Cricut to cut my letters/phrases out I could play with what size worked and the layout.
After I had all my letters cut out and the paint was dry I used my homemade decoupage to add my letters. I also gave the entire coat rack 2 coats to keep the letters secure and from scratches.

In total this project cost around $6! I think that is so awesome with Christmas right around the corner and Holiday travels too!
$3 coat rack
$0.20 decoupage
$0.50 Paint
$1 2 foam brishes
$1 2 sheets scrapbook paper (8"X11")

I also plan on making something like this for my wall as just a plaque, no knobs. You can purchase wood at a Home Depot or most craft stores. The possibilities for modifying this craft are endless!
Have fun and happy crafting!

How to: Fun and cute 'Let it snow' wall hanging.

I'm in no way ready for snow, but I'm slowly getting ready for the holiday season. It seems like every store you go into there is Christmas music playing and holiday decorations everywhere! I've decided since I can't escape it, I may as well embrace it and what better way than crafting!

Perfect wall hanging to keep or give as a gift!

For this project you will need:
1 Wooden wall plaque  16"X4"
Brown craft paint
Medium blue craft paint
Translucent opalescent white paint (optional)
Mod Podge (Matte) 
Sand paper
1-3 foam brushes
"Let it snow" phrase cutout
Snowflake cutouts (several)
Snowman cutout

First sand down any rough edges on your wall hanging, then mix the blue and opalescent paint. I mixed just enough to give the blue paint a shimmer, this is optional I liked the shimmer for a little depth. Cover the entire wall hanging (edges included) with the blue paint and wait for it to dry. Depending on the paint and wood you may need a few coats to cover completely. Once dry, paint the edges with the brown paint and let dry. Once dry, give the brown edges a light sanding to give a "worn" look".
With the frame long ways, apply the "Let it snow" phrase at the top of the frame. Be careful to wipe all access glue away, it will dry glossy. Place snowman at the bottom of the frame and glue on. Between the phrase and snowman place snowflakes to look like they are falling. Once you have everything glued on, apply 1-2 coats of Mod Podge to seal everything down and protect from scratches.

You can also use white (opalescent) puff paint for snow. Either add small to medium dots or make snowflake shapes!
I hope you have as much getting into the holiday spirit as I did! 

How To: Easy to make Holiday luminaries

Today my sister-in-law and I went to a craft show and I was inspired. There were so many incredible things that I do not think I have time to make, but after a quick trip to Michaels and a lot of contemplation we decided to make luminaries.

I plan to make more in different sizes, and also square instead of a circle. I will post more as I make them!

 

 

Blurry, but a good idea of what it will look like light up.

Covered seam

What you will need:

1. Flameless LED Tealights (1)
2. Cardstock/scrapbook paper
3. Vellum
4. Christmas, winter, or holiday punch.
5. Glue
6. Scissors or paper cutter

You first need to cut your paper down to the size you want. I used 11X8.5 paper and cut it in half long ways (4.25") and then cut about 1" to make the final deminsions 4.25"X10".  As I have mentioned before, I have a Cricut and use it for most of my crafting, this project included. If you are using a Cricut make sure to move your blade down about 1.5" and over about 1" to center and allow room for overlapping. If you are using a paper punch, punch around paper, allowing room on both ends for overlapping to glue.

Flip your paper over after all designs are cut out and glue vellium to the back side of the paper. I found that my vellium wanted to curl up at the edges so I placed it under a book to dry for about 10 minutes, and it seemed about perfect. Be sure to get around the edges of your cutouts, or when you roll your paper the vellium will pull away.

 Once you have your design cut out and the vellium glued to the inside, bring the edges together and glue, making sure to wipe all access glue away. I used a hot glue gun to make sure I had a stron hold. If you do not have a hot glue gun, masking tape on the inside and outside to hgold the sides together while they dry may be a good idea. Another tip is to wrap it around something like a can or a peanut butter jar to dry. This way you can make sure you have a perfect circle!

I cut out trees, and glued red stars in the spaces between the trees. and a larger star to cover the seam where the sides are glued together. Other ideas are; gems, sequins, different punches, or bows.

How to create a simple and elegant Christmas card

I have been quite busy lately working on my (gasp!) Christmas cards. I cannot hardly believe it is that time of year already. I have been trying to make each one different, and so far I have been successful!

Here is one of the first ones I have made. It’s pretty simple, but elegant; most impotaint-fast!

Here is what you need:

1 card/envelope-blank

1 ornament cutout

1 small star cutout

Glue

Sissors

Christmas sheet music border stamp

Black ink

Ivory pearlescent paper

I use pre-made blank cards from the craft store for a few reasons, 1. I’m not sure how to make an envelope 2. if I did know, I’m not sure the post office would mail a self-made envelope, and 3. it saves so much time!

Cover the front of your card with the ivory pearlescent paper, I think the slight shimmer gives the card depth and the ornament stand out. Once the paper is glued on and dried, stamp your border with the music stamp. It is important to do this before placing the ornament on so you know where to place the ornament. Next center your ornament and place the star next to it; glue them both on.

It’s as simple as that! A easy and fast homemade Christmas card that takes little time, but comes out beautiful.

Cricut Expression 2! Christmas came early friends!

I'm sure I say this in all of my blog posts, but I have a Cricut. For the past few years I have been using the 6" Cricut--which I do not knock--I loved that Cricut and have made many many lovely things on it. However, my projects are getting better and so should my Cricut so for Christmas my parents got me the new Cricut Expression 2! So I though I would share some the awesome features.


 

*One thing I really like is that it comes with two (or if you go all out and get the 5th year anniversary edition, four) cartridges preloaded. Pretty good ones at that! One is called "Cricut Alphabet" and the other "Cricut Essentials". You also get the flip books, which I think is nice. I always like to have the physical books infront of me. When you turn the Cricut on, they are always in the menu.
* The Expression 2 has the Cricut Design Studio build into it. This means you can flip and manipulate images!
*LCD touchscreen, no more keyboard. This feature also eliminates the need for the size, depth, and speed dials on the sides.
*As you can see from the picture, there is a light on the cutter! This is much more helpful than it looks! When your mats lose a little bit of sticky, it's nice to see what is cutting and if something gets snagged.
*One way they have updated the size, depth, and speed dials is preset options. You can set your settings name it and save it. Say you are cutting a cotton fabric. You can set your speed, depth, and pressure and name it "cotton fabric" and the Expression 2 will remember and let you pick that again.
*There is also a wi-fi option, I haven't used this yet, but I believe this works with the "Craft room" part of Cricut.com
*The Expression 2 also works with the original Cricut cartridges, and the immagine cartridges-however it will not print, just cut.

Those are just a few of my favorite features so far. When I learn more I will keep you all updated on my project endeavors.
Here is a video I found to be helpful from Provo Craft, the people who make the Cricut.